More on Expandable Habitats Cages

May 29, 2012 § 1 Comment

Yes, we’re alive and well!  Hello all, and my apologies for not having written.  We’ve been exceedingly busy but hope to have some more free time in the summer months.

Yet another of life’s turns has required that I dismantle both the budgies’ and Lola’s Expandable Habitats cages this week, quite a nuisance and tough job for one (very petite) person to do solo.  But while taking these behemoths apart, I discovered one more reason why these cages are such fantastic investments and came to love them even more than I already did.  I am lucky that I can’t call any of my birds very mechanical– Lola can tackle some moderately difficult foraging toys, but she’s never been able to unscrew something or open her cage doors on her own.  It’s truly one of my fears that she’ll learn to start taking apart her cage, and one day, while I’m not home, she’ll remove one too many screws and the whole thing will collapse on her.  That’s probably irrational– it seems that even the most mechanical birds are more interesting in escaping their cages than dismantling them– but it’s still a possibility.

Well, I was very pleasantly surprised while taking apart the Expandable Habitats cage that those things simply don’t collapse!  Every single panel that I unscrewed stood completely straight up until the very last screw was removed– I could have removed seven out of the eight screws holding it up and it was still standing tall without collapsing in on itself.  Even when I had removed three out of the four “walls,” the fourth still stood until its very last screw was removed.  I was really amazed at how sturdy every single piece was.  I’ve taken apart several other kinds of cages before, and none were built so sturdily or so well as this.  It was really remarkable and made me feel a lot better about the prospect of Lola developing any mechanical skills.  I still hope she doesn’t, but at least I know that if she does, the cage will never collapse in on her and harm her.

In other news, the flock is still enjoying diffusing our essential oils!  I get a lot of comments and questions about these and I do try to answer all of them so feel free to keep them coming.  I did want to disclose that I recently discovered that I do, in fact, receive a “commission” for those of you who use my Referral Number in registering with Young Living and then purchase products.  I didn’t realize this prior to receiving a random check in the mail — only then did I understand what was going on, so I apologize if anybody feels misled.  That said, I am absolutely not in it for the money and it doesn’t matter to me whether you register under my number or not; I am simply interested in sharing my experience with essential oils and spreading knowledge.  If you register under me, great!  If you don’t, great!  Feel free to ask me questions either way.

Advertisements

Review: Expandable Habitats Budgie Cage

October 27, 2011 § 22 Comments

A few days later and I love my Expandable Habitats cage even more than I did when it first arrived.  Being that they also built Lola’s cage, I wasn’t expecting many surprises, but I still experienced some pleasant ones this second time around.  As some of you might know, my search for the perfect budgie cage has been a long time coming: actually, it began well over a year ago, even before Charles ended up in the powder-coated Featherland cage I hated so much.  It seems that well-made, functional, and large cages made for small birds (with 1/2″ bar spacing in particular) are quite the rarity.  There are a few options on the market: that Featherland cage, the HQ or A&E flight cages, a Prevue Hendryx cage, even an extra-large A&E flight cage.  But after all of my research, I simply wasn’t going to go with a company with a spotty track record in terms of powder-coated lead and zinc safety.  I know that chances are, the cage I purchased would probably be safe: it seems that most are, but a good enough percentage end up with deadly levels of lead or zinc that I don’t want to take that risk — and more importantly, I don’t want to reward a company with a spotty safety record with my hard-earned dollars.  So after trying out the Featherland, which had a better reputation for their powder-coated cages, and still being disappointed, I finally decided that I would have to go custom and American-made if I was going to get the cage I wanted.

Well, it turns out that that didn’t make the search much easier.  I contacted a number of bird cage companies within the U.S.A., who make both powder-coated and stainless steel cages (and even aluminum, and at one point acrylic — not the acrylic sheet style but actually acrylic bars created in the same way as a traditional metal cage).  Even with a relatively open-ended budget, I was turned down by a number of companies: making a large cage for a budgie, it seems, is actually much more difficult than it sounds.  Some companies simply don’t work with small bars, as would be required for a bird as small as a budgie: the bars required for budgies are so much thinner than the thick bars used on a medium to large parrot cage, requiring far more support bars and therefore not only increasing cost but significantly increasing labor as well, and making the acceptable margin of error that much smaller.  Eventually, I was literally left with only one: Expandable Habitats.  Not that that was a bad route to go: as I already know from personal experience, it is a very good one.  I simply like to exhaust my options.

So we began talks, and the result has been spectacular.  It is everything I wanted.  Here are the specs:

  • an American-made cage
  • 304-grade non-magnetic stainless steel
  • 1/8″ bars spaced exactly 1/2″ apart
  • Interior dimensions: 36″ wide by 24″ deep
  • a large front door with one 6 x 6″ door on each side
  • no grate, just a slide out tray
  • an acrylic divider that keeps my aggressive two safe from each other
  • a flat top with a frame that supports an acrylic sheet above
  • a spacious shelf underneath
  • the amazing paper roll system
  • heavy duty casters

the entire cage

I’ll begin with quality: it’s phenomenal.  Really.  This cage is flawlessly electropolished and perfectly constructed.  The welds are strong and beautiful, and the entire cage is a wonderful and airy addition to the room.  The stainless steel is thick and sturdy, and the casters that the cage is mounted on are very heavy duty.  One of the best ways, in my opinion, to distinguish the quality of the cage is to actually put it together.  There are a few hints: the directions or the manual, the actual fit of the panels, the smoothness or rigidity of movement.

Unlike a cage made in China by an anonymous factory, this cage comes with hand-typed instructions complete with diagrams that completely explain how to put the cage together.  Each piece comes specifically and clearly labeled, including all of the bolts and screws!  It even anticipates the difficulties in cage construction that might occur and warns you not to tighten all of the screws on the first round.  It has suggestions for putting the cage together with a second person v. by yourself.  It has suggestions for how to most effectively use the paper roll system.  They are clear, comprehensive, and utterly appreciated by somebody who has ever had to put together a China-made cage.  The best part is, at one point I got confused, so I called the company and they actually picked up.  I didn’t have to wait on hold for ages listening to a recorded message; I spoke to the owner right away and she answered my questions and made sure I was completely satisfied within two minutes.

close up of one of the top corners of the cage

Then when you’re actually putting the cage together, magically, everything fits.  Have you ever had to push, shove, or simply “make” something fit?  I have.  But not with this cage.  Everything fits together perfectly, just as it should– there are holes that line up with each other in the places where screws should go, every panel fits exactly into the next, and there are no sharp edges or jutting bars or unsightly misfits anywhere.  (In fact, because the budgies are so little and I was concerned about little toes being caught at the corners of the cage where the panels come together, the company was nice enough to grind back all of the corner joints so that there were absolutely no small crevices for toes or beaks, and no sharp edges at all.)  Everything fits and is made with the highest safety standards.

close up of the bottom door hinge on the large front door

Finally, everything is smooth and works like a well-oiled machine.  In Charles’s last cage, I literally never shut the door.  Why?  Because if I did, I couldn’t get it back open.  The locks were so rigid and tight that I simply pushed the door ajar– and the hinges on the door itself were so rigid and awful that even that in and of itself was a challenge.  (There was absolutely no risk that Charles could have escaped; it was perfectly safe.)  The side doors, too, were difficult to open and close, and the locks were extremely shoddy.  Not so with this cage.  Every door opens and closes with ease, the wheels run smoothly, and everything simply works!

close up of the front door locking mechanism

On the note of doors and locks, I absolutely love the locking system on this cage; it’s different from their larger parrot cages.  It’s basically an eye screw that can be turned vertically to lock the cage and hold the door in place, or horizontally to open it: it’s so simple, requires no padlocks, nor any other locks or things that can be misplaced!  And, for a small bird, it’s perfectly safe and cannot be manipulated (it’s made of a thicker bar).  This probably wouldn’t work for a large bird– especially a mechanical one– but I don’t see the budgies ever figuring out how to escape from it.

view of the smaller side doors

Both Charles and Sabrina each have one side door.  Usually, these are used as feeder doors, but I like to change the location of mine frequently so I just had them place single ones in the center.  (You can have them customized to have them in different locations, or to have more than one, etc.)  I had them simply placed in the center of each side.  These have the same locking mechanism as the front door.

the custom flat top with the acrylic frame attachment

Here’s what the top of the cage looks like– it comes with an attachment frame that fits a sheet of acrylic through it.  I had this added for a few reasons: first and foremost, Lola is a naughty parrot and likes to land on top of the budgie cage all the time.  I’m weary, for obvious reasons, of her big beak getting through the bars and harming the budgies, and I also don’t want them biting at her toes.  But since all of the birds like to hang out up there, and I have hooks in the ceiling above the cage, the acrylic also keeps everything inside nice and clean (and not soiled!).  I had this done on Lola’s cage first and liked it so much; I consider it a must have for right now while we all share a limited space and confined bird room.

close up of the bottom of the cage

As I stated in the previous entry, I actually had this cage built without a grate at all.  I never use them anyway– I always cover them with paper– and I find them quite a bother to clean.  So I figured I would save some money and opt not to have one at all.  (Of course, should I always change my mind, I can always have one built in the future.)  To compensate for the lack of the grate, the company slightly extended the height of the stainless steel sheet metal at the bottom of the cage.  The effect is actually amazing: all of the debris, feathers, droppings, and food fall to the bottom of the cage (rather than getting stuck on the grate), and the sheet metal acts like a shield to keep it from escaping or flying out of the cage, even when they flap their little wings as hard as they can!  The best part is that unlike seed skirts, they don’t take up an extra 8-10 inches, but rather are perfectly flat against the cage.  That also means that I can’t walk into them and bruise my poor legs because I’m clumsy.  On a more relevant note, I’ve already noticed that there are significantly less dust and feathers around the room.

the paper roll system

Finally, the paper roll system.  For some reason, I opted not to use it when I had Lola’s cage built. I have no idea why.  I absolutely LOVE it!!!  It is so easy to use and so much cleaner!!  I simply roll, pull, and cut.  No more meticulously arranging and fitting newspaper to oddly sized grates or cage bottoms– it’s so quick and easy this way.  It’s also very cleverly designed so that it’s really not visible from the front of the cage at all and isn’t at all unsightly.  I love the system so much that I actually went out and bought a paper roll for Lola’s cage and have switched to using it for hers as well.  No more newspaper for us!  I’ve noticed that observing droppings is much easier with the kraft paper as well.  I’m liking the change quite a bit.

And there you have it.  I love this cage, and I hope I’ve sufficiently conveyed exactly why.  It’s beautiful, it’s well-built, the company offers excellent customer service, and it’s safe.  It is a perfect home for my two little loves.  I highly recommend Expandable Habitats.

In with the New!

October 24, 2011 § 6 Comments

The budgies’ new cage is here!!!  And I somehow mustered up the strength to put the entire thing together, by myself, despite being sick.  The hardest part was probably lifting the massive kraft paper roll by myself.  Now that was heavy.  Otherwise, however, putting it together was a breeze.  It’s really nice to purchase a cage with great and thorough directions, with every single part (and even extras), and with customer service so excellent that the owner of the company is available to answer your phone calls while you’re putting it together if you have any questions (which I did!).  Everything fit together like a breeze (another rarity in parrot cages!).  It is beautiful and shiny and lovely and the budgies have already moved in!!  They are christening it with their first sleep tonight.  I’m too tired to write a full review with any detail tonight and I know that all anyone cares about anyway is photos, so without further ado…

The full cage, in all its glory

The cage body, slightly closer up

The cage is a custom built stainless steel cage from Expandable Habitats.  It matches Lola’s quite well: it has the custom acrylic panel on top that keeps toes from being bitten and also allows them to hang out up there without soiling the interior of the cage.  The entire cage is lovely and incredibly well built!  This time around I actually opted for the paper roll system on the bottom and had them remove the grate entirely since I don’t use them.  There is sheet metal around all four sides, which helps to keep in the mess.  I think clean up will be a breeze with this cage!

Charles's side of the cage

Sabrina's side of the cage

As you can see, the cage is divided in half, split down the center by an acrylic divider.  It’s a bit hard to see in the above photos.  To be honest, it’s not ideal– I hate the acrylic– but stainless steel bars is not an option right now because my two are very, very aggressive towards each other.  It was actually quite difficult to set up their cages with one less wall from which to hang toys and perches.  (I don’t know why anybody would ever want a cage with an acrylic side unless they absolutely had to.  I am hoping that my two will quickly get over their aggression so that I can use a stainless steel barred divider rather than the acrylic as soon as possible.)  But I did it, for now, and we’ll live with it.

Inside Charles's abode

And Sabrina's domicile

For some reason, Charles’s side looks oddly empty in the photos, but it doesn’t in person.  Unlike Sabrina he also never goes to the bottom of the cage, so maybe that’s why it looks so empty.  I am going to stick a few perches down there anyway, though, just in case the mood strikes.  Maybe Sabrina will lure him down there.

In any case, I’m quite pleased with it.  It really is beautiful: very shiny and airy.  I wish I could have gone bigger for them, but at least I can rest assured knowing that the cage is expandable.  Right now, it’s 36″ wide by 24″ deep, so each of them has 24″ by 18″ of space to him and herself.  I had it built, however, so that in the future we can add another 36″ by 24″ section of cage, doubling the size, making it 48″ wide by 36″ overall.  That’s probably a few years off, for now, but it’s something to look forward to for all of us. 🙂

I will write more soon– a full review with plenty of details.  The doors and their locks, for example, I absolutely love!  I will take some closeups and whatnot as well.  Just not tonight!

Review: Expandable Habitats Cage

April 21, 2011 § 4 Comments

Lola’s new cage finally arrived and was set up in December of 2010!!  It was custom built by a company called Expandable Habitats, who make 100% American-made, 304 medical grade, non-magnetic stainless steel cages.  I have done a massive amount of research into cages and have chosen them based on (1) country of origin [I did not want a cage made in China or Mexico], (2) reputation and references [I spoke to MANY people with EH cages and made sure they had rave reviews], (3) custom options, and (4) quality, safety, and warranty.  When I originally found Expandable Habitats, I wasn’t thrilled with the look of their cages as they are not quite the most aesthetically pleasing cages on the market.  But after speaking with the company and several of its happy customers, I realized that they are not about making furniture-quality or beautiful cages, they are about making safe and durable cages that are fit for parrots and their needs.  I had very high expectations for my cage and they did not disappoint!

Lola's beautiful stainless steel cage!

The details of the cage are as follows:

  • Interior dimensions of 42″ wide by 24″ deep by 36″ tall
  • Exterior dimensions of 43″ wide by 27″ deep by 60″ tall
  • Large front door with one 12 x 12″ door on each side of the cage
  • Heavy duty casters for rolling over carpets
  • A flat top with a frame on top of the cage with a piece of acrylic that slides into it (so that I can put hanging play gyms above and not worry about the interior being soiled but still allowing light to pass through, as well as to protect little budgie toes that might land atop Lola’s cage)
  • Slide out grate and tray
  • Shelf below the cage

The nice and BIG front door!

The interior of the cage

I am so pleased with it, and Lola is LOVING it.  She is so active and curious in it.  It is really a beautiful cage with very clean lines and a streamlined, minimalistic look.  At first this put me off of the cages, but I have grown to love it.  The stainless steel is very high quality, and there is a lot of attention to detail here.  Having had a different custom-built cage before to compare this one to, I am very pleased.

The custom acrylic top that protects little budgie toes!

Months later, the cage still looks like brand new, and Lola uses every single inch of her cage.  I can’t say enough good things about this excellent quality cage as well as the wonderful customer service.  I highly recommend Expandable Habitats!

[This entry has been imported, with some edits, from my previous blog.]

Where Am I?

You are currently browsing entries tagged with stainless steel cages at Coco's Flock.